Panasonic WORKIO DP-C354 Operating Instructions Manual Download Page 88

Page: 88 / 100

Cha

pter 6 Printer S

etting
s

15 - 29

AppleTalk Printer Name

Set the AppleTalk printer
name.

When the optional Printer
Controller Module (for Adobe

PostScript

™

) is installed.

There is no default value. When
the machine starts up under the
following parameter settings "

Apple Talk

" is set to "

", "

AppleTalk Zone Name

", and

20 AppleTalk Printer Name

are not set, then, “Panasonic
DP-XXXX and the lower six
figures of MAC Address” will be
automatically setup.

Up to 31 characters

Panasonic
DP-XXXX-
the lower
six figures
of MAC
Address

AppleTalk Type Name

The machine detects, and
display the AppleTalk Type
Name on the Touch Panel.

The Apple Talk Type Name is
displayed only, but cannot be
set.

When the optional Printer
Controller Module (for Adobe

PostScript

™

) is installed.

NetWare

Set “

” to use NetWare.

Off, On

Off

NetWare Frame Type

Set the NetWare frame type.

802.3, 802.2, Ether-II,
SNAP

802.2

Selected Frame Type

The machine detects, and
display the Frame Type on the
Touch Panel.

Frame Type is displayed only,
but cannot be set.

NetWare Mode

Select NetWare Mode.

• Pserver

The machine is used as Print
Server, and prints the waiting
job stored in the machine.

• Rprinter

The machine is used as
Remote Printer, and prints
data which is sent from the
Print Server.

Pserver, Rprinter

Pserver

NetWare Printer Name

Set the NetWare printer name.

Up to 31 characters

Print Server Name

Set the print server name.

Up to 31 characters

Print Server Password

Set the print server password.

Up to 31 characters

No. 20 to 23, 25, to 28

After setting any of these parameters, turn the
machine’s power switch Off, and then On again.

Key Operator

No.

Parameter

Comments

Selective Item

Standard

Setting

Summary of Contents for WORKIO DP-C354





































































































Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands

Panasonic WORKIO DP-C354, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands