Panasonic WORKIO DP-C354 Operating Instructions Manual Download Page 14

Page: 14 / 100

Chapter 2 General Settings

0 - 19

Original Set Beep
Sound

Set whether to sound a confirmation tone
when the original is placed on the Platen
Glass.

The volume level is the same as for
Panel Beep Sound.

When “

18 Panel Beep Sound

” is set to

“

Off

”, the machine makes no sound.

No, Yes

20 - 39

Orig. Set In ADF
Sound

Set whether to sound a confirmation tone
when the original is placed on the ADF.

The volume level is the same as for
Panel Beep Sound.

When “

18 Panel Beep Sound

” is set to

“

Off

”, the machine makes no sound.

No, Yes

Yes

Dept. Counter
Mode

Set whether to display departmental
counters, limit counters, and total counters.

Consult with the authorized Panasonic
dealer on how to use this item.

Date Time Setting

Set the date and the time.

Month, Day, Year, Time

Weekly Timer

Set the weekly On/Off timer using the
Keypad of the machine. At the selected time,
the machine will switch to/from sleep mode.

Each day of the
week.

Off

Daylight Time

Set Daylight Time According to your local
regulation.

• No

Daylight Time is not applied.

• MAR 2nd

From 2:00 AM on the 2nd Sunday in
March to 2:00 AM on the 1st Sunday in
November.

• APR 1st

From 2:00 AM on the 1st Sunday in April
to 2:00 AM on the Last Sunday in
October.

This setting is applied from March 2007
year. You select “MAR 2nd” in 2006, but
the daylight time will automatically set to
“APR 1st”.

No, MAR 2nd,
APR 1st

MAR 2nd

DHCP Default

Select “

Yes

” when your network

environment is based on DHCP Server.
When using this machine as a network
shared printer, select “

”, and set “

TCP/IP Address

”, “

27 TCP/IP Subnet

Mask

”, and “

28 TCP/IP Default Gateway

”.

No, Yes

Yes

TCP/IP Address

Set the IP address.

3-digit x 4

0. 0. 0. 0

TCP/IP Subnet Mask Set the subnet mask.

3-digit x 4

0. 0. 0. 0

TCP/IP Default
Gateway

Set the default gateway.

3-digit x 4

0. 0. 0. 0

DNS Server
Address

Select “

Yes

”, and set the DNS Server

address (when using the optional Internet
Fax/Email function).

No, Yes

Yes

No. 25 to 29

After setting any of these parameters, turn the
machine’s power switch Off, and then On again.

Key Operator

No.

Parameter

Comments

Selective Item

Standard

Setting

Summary of Contents for WORKIO DP-C354





































































































Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands

Panasonic WORKIO DP-C354, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands