Panasonic WORKIO DP-C354 Operating Instructions Manual Download Page 49

Page: 49 / 100

Chapter 4 Fax/Email Settings

0 - 39

Polled File Save

Set whether to delete an original
from memory after the polling
transmission.

• Invalid

After polling transmission, the

original is deleted from
memory.

• Valid

Even after polling

transmission, the original is
kept in memory.

Invalid, Valid

Invalid

Stamp at Memory XMT

Set whether to stamp the
originals when storing them into
memory.

• Invalid

Originals are not stamped.

• Valid

Originals are stamped.
(Depending on the Stamp

setting on the Control Panel)

Invalid, Valid

Valid

Incomplete File Save

Set whether the machine retains
the document in memory if the
document is not successfully
transmitted.

• Invalid

A failed file is not saved.

• Valid

A failed file is saved and

retransmitted as required.

For details about
retransmission, refer to

Resending an Incomplete
Document

in the Operating

Instructions (For Facsimile
and Internet Fax) on the
provided CD-ROM.

Invalid, Valid

Invalid

XMT Reduction

Enable or disable reduced
transmission.

• Invalid

No original is reduced for

transmission.

• Valid

When the transmitting original

is wider than the recording
paper used at the receiving
machine, the machine
performs reduction.

Invalid, Valid

Valid

Fax Parameters

No.

Parameter

Comments

Selective Item

Standard

Setting

Summary of Contents for WORKIO DP-C354





































































































Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands

Panasonic WORKIO DP-C354, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C354

Reviews:

Related manuals for WORKIO DP-C354

Brands by name

Popular brands