Panasonic Workio DP-C262, Facsimile Manual

Page: 132 / 220

132
Cha
pter 5 Internet F
ax
Settings for Inbound Routing
To use the inbound routing feature, program the following parameters to meet the type of routing in
Function Parameters (Fax/Email Settings>Fax Parameters):
z For more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
Routing type Explanation Function Parameters
Routing by sub-
addressing Set this parameter to perform an ITU-T sub-address
query within its auto dialer and to route the received
document(s) to corresponding stations Email
Address(s) or telephone number(s). Set “ 152 Sub-Addr
Routing ” to “ Valid ”
Routing by the numeric ID
of a sending fax station Set this parameter to perform a Numeric ID (TSI frame
information) query within its auto dialer and to route
the received document(s) to the corresponding
stations Email Address(s) or telephone number(s). Set “ 153 TSI Routing ” to
“ Valid ”
To set the From field Use this parameter to select the type if email header to
be included in the "From" field of each routed faxes.
Originator (Origi):
The originating fax machine's TSI will appear in the
"From" field of the routed email.
Relay Station (Rly Stn):
The routing station's email address will appear in the
"From" field of the routed email.
Program “ 154 Route
Header FMT ”
To program printout of
received documents Select whether to print all documents received on this
machine (Always) or print them only if inbound routing
fails (Inc Only). Program “ 155 Print
Routed Doc ”