23
Setting up the Rack
Install the recorder into an EIA standard compliant rack.
Note:
•
Installation in a rack requires four M5 x 12 screws.
1
Remove the 5 rubber feet from the underside of the
recorder.
Use a screwdriver to remove the screws holding the rubber
feet.
2
Attach the handle for rack mounting bracket to the rack
mounting brackets.
Use the four handle fixing screws for rack mounting bracket
and washers to secure them.
3
Attach the rack mounting bracket to both sides of the
recorder.
Secure them using the six rack mounting bracket fixing
screws.
4
Install the recorder in the rack.
Secure using the rack mounting screws.
Rack Mounting
EIA standard compliant
product
(locally procured)
: an EIA-standard 19"rack, depth
550 mm or more
Remo
v
e r
ubb
er feet
Handle for rack mo
u
nting
b
racket
Rack mo
u
nting
b
racket
Handle fixing scre
w
s for
rack mo
u
nting
b
racket
Washer
Washer
Rack mo
u
nting
b
rackets (pro
v
ided)
Handle for rack
mo
u
nting
b
racket
Handle for rack
mo
u
nting
b
racket
Rack mo
u
nting
b
racket fixing scre
w
s (pro
v
ided)
Important:
•
Ensure that the temperature inside the rack does not exceed
45 ºC {113 ºF}.
•
During installation, we recommend installing a fan to keep the
temperature in the rack below 30 ºC {86 ºF}.
•
W
hen installing the recorder in the rack, leave a space of
1 unit (44 mm {1.73"}) above and below each unit.
•
Leave space between racks and ensure proper ventilation
around the racks.
Rack mo
u
nting scre
w
s (M5 x 12, locally proc
u
red)
chap3.fm 23 ページ ２００８年４月８日 火曜日 午後５時２２分
