Panasonic WJND400 - NETWORK DISK RECORDER Page 11 Installation Manual Download

Page: 11 / 60

Major Operatin

Controls and Their Functions

(1) Error indicator [ERROR]

Blinks

hen errors or pro

lems

ith the recorder

s operation

occur.

(2) Alarm indicator [ALARM]

Refer to the Operating Instructions (PDF file) for more
information a

out alarms.

(3) Alarm suspension indicator

[ALARM SUSPEND]

Refer to the Operating Instructions (PDF file) for more
information a

out alarm suspension.

(4) Buzzer stop button [BUZZER STOP]

Use to turn off the

uzzer after an alarm or error occurs.

Refer to the Operating Instructions (PDF file) for more
information a

out alarms and errors.

(5) LCD

Displays the recorder

s status (errors etc.) and functions that

are operated using the

uttons on the front panel.

(6) HDD indicators ("HDD1" to "HDD9")

HDD access indicator (ri

ht side)

Indicates the access status and pro

lems of the HDD.

hen errors occur on an HDD in RAID5/RAID6 mode,

the indicator lights or

links red.

The indicators display the status of the drives from HDD1 to
HDD9,

ut if a system errors occur, each indicator has the

same display.

Front View

(8)

(16)

(15)

(9) (10) (11) (12) (13)

(14)

(6)

(5)

(3)

(2)

(7)

(1)

(4)

Blinks red

: System errors

Blinks orange

: Temperature is too high or lo

Cooling fan stopped, etc.

Blinks

: Alarm has occurred

Lights

: Alarm output stopped

Off

: Alarm is resolved or no alarm has

occurred

Lights

: Alarm suspend stopped

Off

: Alarm is not suspended

Blinks green

: Accessing HDD

Off

: Not accessing HDD

Lights red

: Errors have occurred on the internal

HDD
(Data can

e recovered

y replacing

HDD.)

•

hen in RAID5 mode, the first HDD

has errors

•

hen using RAID6, the first t

HDDs have errors.

Blinks red

: Errors have occurred on the internal

HDD
(Data cannot

e recovered even if

HDD is replaced)

•

hen in RAID5 mode, the second

HDD has errors

•

hen in RAID6 mode, the third HDD

has errors

Lights orange and
red

(Alternately)

: Recovering data from drive in RAID5/

RAID6 mode.
(This indicator looks orange during
high-speed processing.)

ND400_Basic.book 11 ページ２００８年４月８日　火曜日　午後３時５９分

Summary of Contents for WJND400 - NETWORK DISK RECORDER





























































Search results

Summary of Contents for WJND400 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND400 - NETWORK DISK RECORDER

Brands by name

Popular brands

Panasonic WJND400 - NETWORK DISK RECORDER, Installation Manual

Search results

Summary of Contents for WJND400 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND400 - NETWORK DISK RECORDER

Brands by name

Popular brands