Panasonic WJ-NX200K Operating Instructions Manual Download | Manualshive

Page: 126 / 204

background image

126

127

Function

Example

Operation

Next image/Previous
image button

When the next image button is clicked during pausing, the next
frame is played and paused.
When the previous image button is clicked during a pause, the
previous frame is played and paused.

Note:

• When playing H.264/H.265 images, some frames of recorded

images will not be displayed. Reverse frame-by-frame playback
will be performed with the refresh interval setting of the camera.

Fast forward/Fast
reverse button

Playback speed of fast playback will be changed in the following
order each time the fast forward button is clicked:
Step2 (Approx. 2x)

→

Step3 (Approx. 4x)

→

Step4 (Approx. 8x)

→

Step5 (Approx. 16x)

→

Step6 (Approx. 32x)

→

Step7 (Approx. 48x)

Playback speed of fast reverse playback will be changed in the
following order each time the fast reverse button is clicked:
Step2 (Approx. 2x)

→

Step3 (Approx. 4x)

→

Step4 (Approx. 8x)

→

Step5 (Approx. 16x)

→

Step6 (Approx. 32x)

→

Step7 (Approx. 48x)

The playback speed will be displayed on the playback status dis-
play.

Note:

• When playing H.264/H.265 images, some frames of recorded

images will not be displayed. Except for ×2 fast playback
speed, fast playback/fast reverse playback will be performed
with the refresh interval setting of the camera.

Next record/Previous
record button

Clicking the next record button will play back the next later
recording.
Clicking the previous record button will play back the next earlier
recording.
When there is no next/previous recorded image to be skipped to,
the current playback will continue.

Go to last button

When this button is clicked, playback of the latest recorded
images will start. The starting point is around 10 seconds before
the date & time of the latest recorded images.

Playback status display

The status of the recorder such as the playback status, pause sta-
tus etc. will be displayed.
The playback speed will be displayed in fast forward/fast reverse
mode.

Wide view button/
Ctrl screen button

Clicking the button during playback stops the playback and dis-
plays the live image in the wide view/control screen.

Playback operation
panel switch button
(Displayed during
playback on a full
screen)

The playback operation panel will be hidden when the playback
operation panel is displayed. Clicking the button again will return
to the original display.
Clicking the button during the live image display will start playback
and displays the playback operation panel.

[Operation via recorder's main monitor]

«
...
124
125
126
127
128
...
»

Summary of Contents for WJ-NX200K













































































































































































































Reviews:

No comments

Related manuals for WJ-NX200K

Brand: Makita Pages: 60

Brand: Makita Pages: 11

Brand: Makita Pages: 3

Brand: Makita Pages: 8

Brand: Makita Pages: 3

Brand: Makita Pages: 44

Brand: Makita Pages: 12

Brand: Makita Pages: 2

Brand: Makita Pages: 3

Brand: Coby Pages: 1

Brand: Baileigh Industrial Pages: 60

Pocket Candy Zent

Brand: Xtatix Pages: 14

Brand: IRiver Pages: 32

615 - DVP 615 - DVD Player

Brand: Zenith Pages: 40

Brand: Denon Pages: 35

Brand: ITC Audio Pages: 12

Brand: JVC Pages: 40

Brand: Emerson Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands