57
9
Sequence
Selecting “ ” (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the
same as pressing and holding the [SEQUENCE] button for three seconds or longer. When in one of the multi-
view formats, selecting “ ” will cause the recorder to go through predefined screen layouts (Full Sequence).
Or, the bottom, right screen will display live cameras sequentially (Partial Sequence). For example, if you
select “ ” in the 2x2 format, the recorder changes pages as follows:
< Full Sequence >
< Partial Sequence >
Figure 70: Sequence pattern
Selecting “ ” again in the Live Monitoring menu exits the Sequence mode. While in the Sequence mode, the
icon displays in bottom-left corner if Sequence is selected in the Display setup screen (“OSD” tab). If all
the cameras in a page are Off, or have lost video or are set to Covert (unless the user has authority to view
covert cameras), that page will be excluded from the sequence.
Note: The “Full Sequence” for the full sequence monitoring and the “Partial Sequence” for the Partial
sequence monitoring should be selected in the Display setup screen (“Main Monitor” tab).
:
Camera Menu
p
p
PTZ:
Selecting “ ” (Camera Menu) → “PTZ” and choosing the camera number allows you to control the
selected camera as long as it has Pan, Tilt and EL-Zoom capabilities. It is the same as pressing the [PTZ]
button. Refer to the following “PTZ Mode” section for details.
p
p
EL-Zoom:
Selecting “ ” (Camera Menu) → “EL-Zoom” and choosing the camera number zooms the
current image of the selected camera on the screen. It is the same as pressing the [EL-ZOOM] button.
Selecting “EL-Zoom” again in the Camera Menu again exits the EL-Zoom mode. Refer to the following
“EL-Zoom Mode” section for details.
p
p
Audio:
Selecting “ ” (Camera Menu) → “Audio” toggles audio output On and Off.
p
p
Color Control:
Selecting “ ” (Camera Menu) → “Color Control” and choosing the camera number allows
you to control brightness, contrast, hue and saturation for each camera for the selected camera if a user
who has “Color Control” authority logs into the system. It is the same as pressing and holding a camera
button for a few seconds.
p
p
Edit Group:
Selecting “ ” (Camera Menu) → “Edit Group” enters to the Edit Group mode. It is the same
as pressing and holding the [EDIT GROUP] button for three seconds or longer in any multiview formats.
Refer to the following “Live Monitoring – Edit Group Mode” section for details.
Note: It is important that cameras and monitors are correctly installed and adjusted prior to making
any image adjustments using the recorder’s controls.
Any image adjustments you make will be applied to both the live video on the monitors and the
recorded video.
The “Camera Menu” also can be displayed by clicking the right mouse button on the screen
while in the live monitoring mode.
;
Search
p
p
All Channels:
Selecting “ ” (Search) → “All Channels” exits the live monitoring mode and enters the
search mode. It is the same as pressing the [PLAYBACK] button.
p
p
Triplex:
Selecting “ ” (Search) → “Triplex” enters the Triplex mode. Selecting the camera number plays
back video of the selected camera.
