16
SPOT SEQ SETUP
STEP CH SEC STEP CH SEC
1 1 2S 9 9 2S
2 2 2S 10 10 2S
3 3 2S 11 11 2S
4 4 2S 12 12 2S
5 5 2S 13 13 2S
6 6 2S 14 14 2S
7 7 2S 15 15 2S
8 8 2S 16 16 2S
SPOT SEQ SETUP
STEP CH SEC STEP CH SEC
1 1 2S 9 9 2S
2 2 2S 10 -- 0S
3 3 2S 11 -- 0S
4 4 2S 12 -- 0S
5 5 2S 13 -- 0S
6 6 2S 14 -- 0S
7 7 2S 15 -- 0S
8 8 2S 16 -- 0S
Step Assignment
1. Move the cursor to the step number you want to edit in
the CH area by pressing the cursor (
C
,
D
,
A
,
B
) but-
tons.
2. Select the desired camera channel in the CH area by
pressing the Increment (+) or Decrement (–) button.
1 - 16:
Camera Channel
Note:
10-16 are not available for WJ-FS109.
– –:
Not Assigned
3. Repeat the above procedures to assign other steps.
Dwell Time
1. Move the cursor to the SEC (Second) area by pressing
the cursor (
C
,
D
,
A
,
B
) buttons.
2. Select the desired dwell time in the SEC area by press-
ing the Increment (+) or Decrement (–) button.
Dwell Time can be selected between 0S and 30S.
Note:
A step assigned a dwell time of 0S is skipped.
<WJ-FS116>
<WJ-FS109>
■
System Setup Menu
Move the cursor to SYSTEM SETUP on the SETUP menu,
then press the
SET
button. The SYSTEM SETUP 1/2 menu
appears on the monitor screen as shown below.
WJ-FS116 SETUP
ALARM SETUP
MONITOR OUTPUT SETUP
REC OUTPUT SETUP
SEQUENCE SETUP
SYSTEM SETUP
SYSTEM SETUP 1/2
TITLE SETUP
TITLE POSI
CAM SW LOSS ON
PLAYBACK AUTO ON
PASSWORD OFF
PWR ON MODE 1
VTR KEY LOCK OFF
SYSTEM SETUP 2/2
ENCODE PANA
SYSTEM SETUP 2/2
ENCODE OTHERS
SW INTERVAL 1
NO. OF CAMS 16
To go to SYSTEM SETUP 2/2, press the
C
button.
To go back to SYSTEM SETUP 1/2, press the
D
button.
1. TITLE SETUP
This item lets you edit the camera title to be displayed on
the monitor screen.
Up to 8 alphanumeric characters can be displayed on the
monitor.
1. Move the cursor to TITLE SETUP parameter, then press
the
SET
button.
The TITLE SETUP menu appears on the monitor screen
as shown on next page.
