manualshive.com logo in svg

Panasonic VoiceSonic KX-NT700, Operating Instructions Manual

Share
Download
Panasonic VoiceSonic KX-NT700 Operating Instructions Manual Download Page 74

Message

Possible Cause & Solution

Reference

No Connection To
Analog Line

•

You tried to make a call immediately after refusing a call.

→

Wait until "

TEL

" is shown on the display, then make the

call.

—

No Connection To
SIP Server

•

The unit’s network settings and/or SIP settings are incorrect.

→

Consult your system administrator.

—

No Connection To IP
Network

•

The LAN cable is not connected.

→

Check all connections.

page 25

•

The unit cannot receive IP settings from the DHCP server.

→

Consult your system administrator.

—

Hold Failure

•

The call could not be put on hold.

→

Check the status of the other party (or IP-PBX).

→

Wait a while and try again.

—

Resume Failure

•

The call could not be retrieved from hold status.

→

Check the status of the other party (or IP-PBX).

→

Wait a while and try again.

—

74

Operating Instructions

Document Version    2011/06

Troubleshooting

Summary of Contents for VoiceSonic KX-NT700

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands