IP Network Settings
To properly connect the unit to an IP network, the
following settings must be set to match the settings of
the IP network. Consult your system administrator for
the appropriate settings.
–
IP address mode: Automatic (DHCP) or manual
(static) IP address assignment (default: static)
–
IP address (when static connection mode is
selected; default: 192.168.0.2)
–
Subnet mask (when static connection mode is
selected; default: 255.255.255.0)
–
Default gateway (when static connection mode is
selected; default: 0.0.0.0)
Note
•
IP addresses can be entered using the keypad.
[0]
–
[9]
are used to enter numbers and
[ ]
is
used to enter a period. For example, to enter
"192.168.0.1", press
[192 168 0 1]
.
Automatic Assignment (DHCP)
1.
Press
[MENU]
.
2.
Select "
IP Network Settings
", then press
SELECT
.
3.
Select "
IP Address Mode
", then press
SELECT
.
4.
Select "
DHCP
", then press
SAVE
.
5.
Press
[MENU]
.
Note
•
If this setting is changed, the unit must be
restarted before the new setting becomes
effective (see page 47).
•
To confirm the IP address, press
[MENU]
®
"
Show IP Address
"
®
SELECT
.
Manual Assignment (Static)
1.
Press
[MENU]
.
2.
Select "
IP Network Settings
", then press
SELECT
.
3.
Select "
IP Address Mode
", then press
SELECT
.
4.
Select "
Static
", then press
SAVE
.
5.
Select "
IP Address
", then press
SELECT
.
6.
Enter the IP address to be assigned to the unit, then
press
SAVE
.
7.
Select "
Subnet Mask
", then press
SELECT
.
8.
Enter the subnet mask, then press
SAVE
.
9.
Select "
Default Gateway
", then press
SELECT
.
10.
Enter the IP address of the default gateway, then
press
SAVE
.
11.
Press
[MENU]
.
Note
•
If this setting is changed, the unit must be
restarted before the new setting becomes
effective (see page 47).
•
To confirm the IP address, press
[MENU]
®
[Show IP Address]
®
SELECT
.
Document Version 2011/06
Operating Instructions
27
Preparation
