manualshive.com logo in svg

Panasonic VoiceSonic KX-NT700, Operating Instructions Manual

Share
Download
Panasonic VoiceSonic KX-NT700 Operating Instructions Manual Download Page 61

Reset System Data

Description

Allows you to reset all system data (i.e., the parameters described in this section) to the factory default settings.

•

After executing this feature, the unit will restart automatically.

•

The following data and settings 

are not erased

 when this feature is executed.

–

"

Date & Time

" setting (note that the "

Time Format

" setting is reset)

–

Phonebook entries

–

Redial list

–

SD memory card recordings

Reset All Data

Description

Allows you to reset all system data (i.e., the parameters described in this section), user data, and all settings.
The unit is returned to its factory default state when this feature is executed.

•

After executing this feature, the unit will restart automatically.

•

The following data and settings 

are not erased

 when this feature is executed.

–

SD memory card recordings

•

The following data and settings 

are erased

 when this feature is executed.

–

"

Date & Time

" setting

–

Phonebook entries

–

Redial list

Reboot

Description

Allows you to restart the unit.

•

No data is erased when this feature is executed.

Document Version    2011/06

Operating Instructions

61

Programming the Unit

Summary of Contents for VoiceSonic KX-NT700

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands