DIP switch settings for gate call settings
Gate call settings can only be used for systems that are connected to 1 control box.
(Gate call settings support up to 560 room units.)
DIP switch
Description
1 2 3 4 5 6 7 8
ON
OFF
Example of when the 1st lobby station room control box
1 is set to gate call
the 2nd to 3rd lobby stations connect to the extension box.
DIP switch settings for gate call settings
For extension boxes with D suffixes or later for the serial number (page 92):
When configuring gate call settings for systems with 2 or more control boxes connected to an extension box, set the
DIP switches of the extension box to the following.
(Gate call settings support up to 2240 room units.)
DIP switch
Example where lobby stations 1-6 are configured
from each control box 1-4
1 2 3 4 5 6 7 8
ON
OFF
1st lobby station
1 2 3 4 5 6 7 8
ON
OFF
2nd lobby station
1 2 3 4 5 6 7 8
ON
OFF
3rd lobby station
1 2 3 4 5 6 7 8
ON
OFF
4th lobby station
1 2 3 4 5 6 7 8
ON
OFF
5th lobby station
1 2 3 4 5 6 7 8
ON
OFF
6th lobby station
Note:
R
Gate mode settings are comprised of combinations of extension telephone numbers and lobby station numbers,
and up to 3 combinations can be set to each control box.
75
5. Programming
