Panasonic VL-MWD272, Operating Instructions Manual

Page: 29 / 40

10.1 Cleaning
Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a moist cloth.
Important:
R Do not use any cleaning products that contain
alcohol, polish powder, powder soap, benzine,
thinner, wax, petroleum, or boiling water. Also do
not spray the product with insecticide, glass
cleaner, or hair spray. This may cause a change
in colour or quality of the product.
Cleaning the charger:
For safety, disconnect the charger from the power supply
before cleaning.
Cleaning the sub monitor:
To avoid mistakenly operating the sub monitor, remove
its batteries before cleaning.
10.2 Specifications
Main monitor (VL-MWD272)
Power source 220-240 V AC, 50/60 Hz
Power
consumption Standby: approx. 2.5 W
During operation: approx. 10 W
Dimensions
(mm) (height
´
width
´
depth)
Approx. 158
´
243
´
29.5
(excluding protruding sections)
Mass (weight) R VL-MWD272BX:
approx. 825
g
R VL-MWD272CX/ML:
approx. 875
g
R VL-MWD272AZ:
approx. 835
g
Operating
environment Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 17.8 cm (7.0 inches
wide colour display)
Talking method Hands-free
Installation
method Wall mount (mounting bracket
supplied)
Frequency
range 1.88 GHz to 1.90 GHz
RF transmission
power 250 mW (max.)
Doorphone (VL-V522L)
Power source Power supplied by the main
monitor
Dimensions
(mm) (height
´
width
´
depth)
Approx. 131
´
99
´
36.5
(excluding protruding sections)
Mass (weight) Approx. 200
g
Operating
environment Ambient temperature: approx.
-15 °C to +55 °C
Relative humidity
(non-condensing): up to 90 %
Viewing angle Horizontally: approx. 87°
Vertically: approx. 66°
Installation
method Wall mount (mounting base
supplied)
Minimum
illuminance
required 1 lx
(within approx. 50 cm from the
camera lens)
Lighting method LED lights
Sub monitor (VL-WD613)
n Main body
Power source Rechargeable Ni-MH (AAA
´
2)
Dimensions
(mm) (height
´
width
´
depth)
Approx. 173
´
52
´
30
(excluding protruding sections)
Mass (weight) Approx. 160
g
(including the
batteries)
Operating
environment Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 5.6 cm (2.2 inches,
colour display)
Frequency
range 1.88 GHz to 1.90 GHz
RF transmission
power 250 mW (max.)
Talking method Hands-free
Operating time
*1 Standby use: approx. 80 hours
Charging time
*2 Approx. 8 hours
Transmitting
range Approx. 100 m (line-of-sight
distance from the main monitor)
*1 When used fully charged in an operating
temperature of 20 °C.
*2 When the operating temperature is 20 °C. The
charging time may increase when the operating
temperature is lower than this.
n Charger
Power source AC adaptor (PNLV226)
5.5 V DC, 0.5 A
Power
consumption Standby: approx. 0.4 W
(when the sub monitor is not
placed in the charger)
During charging: approx. 1.4 W
29
10. . General information
10. General information