4.1 Answering doorphone calls
When you receive a call from a doorphone, the main
monitor, extension monitor, and sub monitor ring, and
display an image from the doorphone.
To answer the call
Press
M
N
.
R
Speak within about 50 cm of the microphone.
R
Speak alternatively with the visitor. If you and the
visitor speak at the same time, you will not hear each
other.
R
You can talk for up to about 90 seconds.
To end the call
Press
M
N
.
Note:
R
The display will turn off if you do not answer a call
within about 30 seconds.
R
The displayed images are automatically recorded to
the main monitor (page 17).
Features available during incoming calls
– Monitoring feature (page 15)
Features available while talking
– Adjusting wide/zoom and pan/tilt settings
– Turn on or off the operation guide (page 21)
– Adjusting sound and display settings (page 21)
– Using "press-to-talk" (page 15)
– Transferring calls to other devices (page 15)
*1 These functions are not available for the supplied
doorphone (VL-V522L). You can use these
functions with optional doorphones (page 4).
Press-to-talk mode
If it is difficult for you and the visitor to hear each other
due to noise, the "press-to-talk" mode can make
conversations easier to hear.
1.
While talking, activate press-to-talk mode by
pressing and holding
M
N
for about 2 seconds.
R
A beep sounds and
(or
for the sub
monitor) is displayed.
2. To speak to the visitor
Speak while pressing and holding
M
N
.
To listen to the visitor
Release
M
N
.
Note:
R
Press-to-talk mode is cancelled when the call ends.
4.2 Transferring doorphone calls
You can transfer a doorphone call between the main
monitor, sub monitor, and extension monitor.
To transfer a call
1.
While talking with the visitor at the doorphone, press
M
N
.
2.
If there a multiple devices, select the device to
transfer the call to
®
.
R
To page all devices, select
“
Call all
together
”
®
.
3.
Page the other party.
4.
When the paged party answers, ask them to receive
the call from the doorphone
®
M
N
.
R
To cancel transferring the call and talk to the
visitor again, press
M
N
.
To receive a call
1.
When the intercom call is received, press
M
N
to talk to the paging party.
2.
When the image from the doorphone is displayed,
talk to the visitor.
3.
When finished, press
M
N
.
Note:
R
The visitor cannot hear voices during paging.
R
When using the sub monitor to transfer calls or
receive transferred calls, extension monitors are
displayed as sub monitors in the list of available
devices and for the device name of incoming calls.
For example,
“
Extension monitor 1
”
is
displayed as
“
Sub monitor 1
”
.
4.3 Monitoring the outside with
the doorphone
You can monitor the sounds and images from the
doorphone using the main monitor, extension monitor,
and sub monitor.
1
Press
M
N
.
R
If there are multiple doorphones, select the
desired doorphone
®
.
R
The images from the doorphone are displayed.
2
Monitor the sound and image.
R
You can talk to the monitored party by pressing
M
N
.
3
When finished, press
M
N
.
Note:
R
The sound from your end will not be heard at the
doorphone.
R
You can monitor for up to about 3 minutes.
Features available while monitoring
– Recording doorphone images (page 17)
– Adjusting wide/zoom and pan/tilt settings
– Turn on or off the operation guide (page 21)
15
4. . Talking and monitoring
4. Talking and monitoring
Summary of Contents for VL-MWD272
Page 40: ...PNQP1311YA C0916MM1106 ...
