・Loss, leakage, falsification or theft of user information.
・Unauthorised or illegal use of the system by a third party.
・Interference or suspension of service caused by a third party.
What is user information?
User information is defined as the following types of information.
・Information stored in the product
・Information stored on the computer that is used by the setup tool
・Observe proper management of passwords.
‒ Passwords can be used to program the system, open doors, etc.
Select passwords that are difficult to guess, change them regular-
ly,and keep them secret. Assign a unique password to each device.
‒ You will never receive enquires about passwords from Panasonic.
‒ When configuring email addresses, room numbers, or other cont-
act information, make sure all information is entered correctly.
Incorrect information could cause user information to bedisclose-
d to unintended recipients.
・Use caution when entering or saving contact information for use
by the system.
・Protect user information when sending the product to be repaire-
d, or when handing it over to a third party.
‒ System event information
‒ Messages and camera images
‒ Resident names and room numbers
‒ System and device settings
‒ Resident names and room numbers
‒ System and device settings
Data security guidelines
5
6
2.5 For best performance
‒ Use the product's reset function to initialise the product before
when sending the product to be repaired or handing it over to a
third party.
‒ Note that user information may be deleted or initialized when
the product is repaired.
‒ Refer all repairs to a trusted Panasonic service centre.
‒ When user information is stored on a computer, the confidential-
ity of that information becomes the responsibility of the installer.
Take precautions to prevent the unauthorised use of the comput-
er and the setup tool used for performing system configuration or
maintenance.
‒ Connect the computer to the network only when performing sys-
tem configuration or maintenance,and disconnect the computer
from the network as soon as the work is complete.
‒ Use a secure network that is protected by a firewall, etc.
‒ To prevent the leaking of personal information, enable a screens-
aver for the computer that uses a password.
‒ Before disposing of the computer, ensure that data cannot be
retrieved from it by formatting the hard disk and/or rendering it
physically unusable.
‒ Use the product's reset function to initialise the product before
disposing of the product.
・Protect user information when disposing of the product.
・The product should not be exposed to direct sunlight.
・The product should be kept away from heat sources such as radia-
tors, cookers, etc. It should not be placed in rooms where the
temperature is less than 0 °C or greater than 40 °C. Damp basemen-
・Protect user information stored on the computer used to configu-
re the system.
Environment
