TH-65PF10UK
27
4. Disconnect the connector (V2) and then remove V1-
Board.
5. Remove the Operation Button from V2-Board.
6. Disconnect the connector (V15) and then remove V2-
Board.
8.20. Removal of Front Glass
1. Remove the Cabinet.
(Refer to Removal of Cabinet)
2. Remove 28 screws and remove the Fixed Angles (A), (B),
(C), (D).
3. Remove the Front Glass.
Note: when Front Glass is exchanged
• Along each Fixed Angles of an top and bottom, right and
left order and the sponge for the Front Glass is pasted to
the Front Glass.
Note:
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.21. Removal of Plasma Panel
•
The C1,C2,C3,C4,C5,C6 Boards are connected with the
plasma panel for the repair.
1. Disconnect the connectors (PB30, PB31, PB32, PB33,
PB34, PB35, PB36, PB38).
2. Remove 2 screws and then remove PB-Board.
3. Remove 16 screws and then remove the Fan Blocks (A),
(B), (C), (D).
4. Remove 4 screws and then remove the Reinforcement
Angles (L), (R).
5. Remove the Flexible Cables from the connectors (DN1,
DN6).
6. Remove the connectors (DN2, DN3, DN5).
Summary of Contents for Viera TH-65PF10UK
