TH-65PF10UK
26
8.17.1. Removal of Fan (A), (B)
1. Remove 8 screws and then remove the Fans (A), (B).
8.17.2. Removal of Fan (C)
1. Remove 4 screws and then remove the Fan (C).
8.17.3. Removal of Fan (D), (E)
1. Remove 8 screws and then remove the Fans (D), (E).
8.17.4. Removal of Fan (F), (G)
1. Remove 8 screws and then remove the Fans (F), (G).
8.17.5. Removal of Fan Sponge
Note:
The Fan Sponges are not re-usable.
Please use a new one when Fan exchange.
8.18. Removal of Cabinet
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board).
2. Disconnect the 2 Relay Connectors (DS2, DS15).
3. Remove 18 screws of the Cabinet.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma
Panel (arrow2).
8.19. Removal of V1-Board and V2-
Board
1. Remove the Cabinet.
(Refer to Removal of Cabinet)
2. Remove 20 screws and then remove the Fixed Angles
(A), (B), (D).
3. Remove 1 screw (L).
Summary of Contents for Viera TH-65PF10UK
