TH-65PF10UK
21
2. Remove 4 screws and then remove the Slot Case.
3. Remove 4 Hexagonal-Head screws (G) and 2 screws of
HX-Board and then remove HX-Board.
8.6.
Removal of PB-Board
1. Disconnect the connectors (PB30, PB31, PB32, PB33,
PB34, PB35, PB36, PB38).
2. Remove 2 screws and then remove PB-Board.
8.7.
Removal of DN-Board
1. Remove the Flexible Cables from the connectors (DN1,
DN6).
2. Disconnect the connectors (DN2, DN3, DN5).
3. Remove 4 screws and then remove DN-Board.
8.8.
Removal of D-Board
1. Remove PB-Board. (Refer to Removal of PB-Board)
2. Remove the Flexible Cables from the connectors (DN1,
DN6).
3. Disconnect the connectors (D3, D5, D20, DN3).
4. Remove 5 screws and then remove the DN-Board Block.
5. Disconnect the connector (D25).
6. Remove the Flexible Cables from the connectors (D31,
D32, D33, D34, D35, D36).
7. Remove 4 screws and then remove D-Board.
8.9.
Removal of P-Board
Please exchange fuse (F1601, F1602, F1701, F1702) at the
same time when you exchange P-Board.
The fuse is not bundled to P-Board for the repair.
1. Disconnect the connectors (P2, P5, P9, P10, P11, P12,
P23, P25, P51, P53, P55).
Summary of Contents for Viera TH-65PF10UK
