manualshive.com logo in svg

Panasonic Viera TC-P54Z1, Technical Manual

Share
Download
Panasonic Viera TC-P54Z1 Technical Manual Download Page 60

Slide #60

System MPU SOS Detect

10 Blinks SOS: 

IC25600 generates the SUB5V and BUB3.3V, IC25601 generates the SUB1.8V and 

SUB1.2V, IC25300 generates GC6-3.3V, and IC25312 generates GC6-18V and GC6-1.2V. These 
voltages are monitored by a SOS detect circuit. Any abnormality on these voltages triggers the 
shutdown circuit and the MPU shuts down the unit. The power LED blinks 10 times.

11 Blinks SOS: 

The ventilation fans are monitored for proper operation. If one of the fans opens or 

increases resistance, the resulting current change is applied to pin 61 of the main CPU (IC21100). 
This triggers the Fan SOS and the TV shuts down. The power LED blinks 11 times.

12 Blinks SOS: 

The operation of the audio power amplifiers IC22301 and IC22302 is monitored. If 

the audio output circuit develops a short to ground, a high is output to pin 27 of the MPU (IC21100), 
triggering a SOS condition. The power LED blinks 12 times.

14 Blinks SOS

: 

Audio PWM.

Summary of Contents for Viera TC-P54Z1






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands