manualshive.com logo in svg

Panasonic Viera ST50A series, Operating Instructions Manual, Page: 15 / 111

Share
Download
Panasonic Viera ST50A series Operating Instructions Manual Download Page 15

 Basic Connection

15

  Network

 To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network 
environment.

●

 

 If you do not have any broadband network services, please consult your retailer for assistance.

●

 

 Prepare the internet environment for wired connection or wireless connection.

●

 

 Setup of the network connection will start after the tuning (when first using the TV). 

  (p. 16 - 18)

 

■

  Wired connection

 

 TV

 Internet environment

 ∗

Less than 10 cm

 LAN cable (Unshielded)

●

 

 Use the Unshielded Twist Pair (UTP) LAN cable.

 

 Ferrite core - Large size (supplied)

  Installing the Ferrite core

 

 

 

 Pull back the tabs 
(in two places)

 Wind the cable twice

 Close

 

■

  Wireless connection

 

 Internet environment

 Access point

 Built-in wireless LAN

  Using clamper

 

 

■

  Clamper 

(Standard accessory)

 Attach the clamper

 Bundle the cables

 

 hole

 Insert the 
clamper in a hole

 

 hooks

 Set the tip in 
the hooks

 To remove from the TV:

 To loosen:

 

 Keep pushing 
both side snaps

 snaps

 

 knob

 Keep pushing 
the knob

●

 

 Do not bundle the RF cable and mains lead 
together (could cause distorted image).

●

 

 Fix cables with clampers as necessary.

●

 

 When using the optional accessory, follow the 
option’s assembly manual to fix cables.

Summary of Contents for Viera ST50A series
















































































































Reviews:

No comments