background image

 How to Use Menu Functions

43

 Menu

 Item

 Adjustments / Configurations (alternatives)

 Sound

 Mode

 Selects your favourite sound mode 

[Music] / [Speech] / [User]

 

 The selected mode affects all input signals.

 [Music]:

 Improves sound quality for watching music videos, etc.

 [Speech]:

 Improves sound quality for watching news, drama, etc.

 

 In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and 
those settings will be stored for each mode.

 [User]:

 Adjusts the sounds manually by using the equaliser to suit your favourite sound 
quality.

 

 For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] 
and [Treble]. Select [Equaliser] and adjust the frequency. 

 

[Equaliser] (see below)

 Bass

 Adjusts level to enhance or minimise lower, deeper sound output

 Treble

 Adjusts level to enhance or minimise sharper, higher sound output

  Equaliser

 Adjusts the frequency level to suit your favourite sound quality

 

 This function is available when [Mode] is set to [User].

 

 Select the frequency and change the frequency level by using the cursor button.

 

 To enhance the bass sound, raise the level of the lower frequency. To enhance 
the treble sound, raise the level of the higher frequency.

 

 To reset the levels of each frequency to the default settings, select [Reset 
Equaliser Settings] by using the cursor button, and then press the OK button.

 Balance

 Adjusts volume level of right and left speakers

  Headphone Volume

 Adjusts the volume of the headphones

 Surround

 Surround sound settings 

[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
 [V-Audio]:

 Provides a dynamic enhancer of width to simulate improved spatial effects.

 [V-Audio Surround]:

 Provides a dynamic enhancer of width and depth to simulate improved spatial 
effects.

 [V-Audio ProSurround]:

 Provides a more progressive enhancer and reverberation to simulate improved 
spatial effects.

 Auto Gain Control

 Automatically regulates large sound level differences between channels and 
inputs 

[Off] / [On]

 Volume Correction

 Adjusts the volume of individual channel or input mode

 Speaker Distance to 
Wall

 Compensates for the low frequency sound due to the distance between the 
speakers and the wall 

[Over 30cm] / [Up to 30cm]

 

 If the back space between the TV and wall is over 30 cm, [Over 30cm] is 
recommended.

 

 If the back space between the TV and wall is within 30 cm, [Up to 30cm] is 
recommended.

Summary of Contents for Viera ST50A series
















































































































Reviews: