USB HDD / SD Card Recording
60
USB HDD / SD Card Recording
You can record the digital TV programmes to the connected USB HDD or inserted SD Card and enjoy playing back in
various ways.
●
Analogue TV programme cannot be recorded on the USB HDD / SD Card.
●
The data broadcasting (MHEG, etc.), radio broadcasting and the periods without any signal will not be recorded.
●
Not all the programmes can be recorded depending on the broadcaster and service provider.
●
You cannot copy the recorded contents of the USB HDD.
●
It is recommended to use the SD Card formatted with this TV.
(p. 62)
●
For more information of the USB HDD and the SD Card
(p. 99)
Caution
●
All data in the USB HDD / SD Card will be erased in the following cases:
•
When formatting the USB HDD / SD Card with this TV
“Setting for USB HDD / SD Card” (p. 61)
•
When formatting the USB HDD / SD Card to use on PC, etc.
●
When the TV is repaired due to a malfunction, you may have to format the USB HDD again with this TV to use it. (All
data will be erased when formatting.)
●
In order to use the USB HDD with your PC after recording with this TV, format it again on your PC. (Special
operations or tools may be necessary to format on your PC. For details, read the manual of the USB HDD.)
●
The data recorded on the USB HDD / SD Card with this TV can only be played back on this TV. You cannot play back
its contents with another TV (including the TV of the same model number) or any equipment.
●
Do not turn the TV off, pull out the mains plug or remove the USB HDD / SD Card during operation (formatting,
recording, etc.). It may cause malfunction of the device or damage the recorded data. (Also when the electric outage
occurs.) It is recommended to back up the data (if any) of the SD Card before using with this TV.
■
Preparation for USB HDD / SD Card
USB HDD
SD Card
Connect the USB HDD to the USB 1 port with the USB
cable.
●
Be sure to connect the USB HDD to the socket outlet.
●
To remove the USB HDD safely from the TV
(p. 22, 62)
●
Check the type of terminals and cable plugs are correct
when connecting.
●
Unlock the write-protection switch (on the left side of the
SD Card) to record and play back.
USB cable
USB HDD
socket outlet
Gently insert the SD Card with the label surface
facing front.
Cutout
Push until a click is heard.
To remove, push again.
1
Display the menu and select [Setup]
Setup
select
access
2
Select [Recording Setup]
Recording Setup
Access
select
access