Panasonic Viera ST50A series Page 62 Operating Instructions Manual Download

Page: 62 / 111

USB HDD / SD Card Recording

USB Drive A

USB Flash Disk

USB HDD 1

USB HDD Setup

Product

Name

USB HDD name is displayed

Mode

: The USB HDD is available for recording / playing back.

Only one USB HDD on the list is available for recording.

: The USB HDD is available for playing back.

●

To format

●

To edit USB HDD name

●

To change the mode

●

To remove the USB HDD safely from the TV

•

To set “Safely remove USB” in other conditions

(p. 22)

SD Card Formatting

Formats the inserted SD Card.

●

Please note that all data in the SD Card will be erased after formatting.

Caution and confirmation of using SD Card and start format

SD Card Formatting

Are you sure?

Yes

Format SD card.

All data stored on the SD card will be deleted during

formatting. Continue?

SD Card Formatting

Yes

select [Yes]
set

●

If the formatting has failed,

•

Ensure the SD Card is inserted correctly.

(p. 60)

•

Ensure the write-protection switch is unlocked.

•

Check your SD Card is suitable for recording.

(p. 99)

Recording the TV programme to USB HDD / SD Card

You can record the current programme immediately by using [One Touch Recording].
You can also record the current programme constantly for the selected period by using [REW LIVE TV] so that you can
go back or pause the current programme.

●

[REW LIVE TV] is available only with USB HDD.

●

Ensure the connection and setup are completed before start recording.

(p. 60 - 62)

●

Do not turn the TV off, pull out the mains plug or remove the USB HDD / SD Card during recording.

●

If the remaining capacity of the USB HDD / SD Card is run out, the recording cannot be done.

Select [One Touch Recording] or [REW LIVE TV]

One Touch Recording

Recording Setup

180 minutes

REW LIVE TV

Off

Summary of Contents for Viera ST50A series
















































































































Search results

Summary of Contents for Viera ST50A series

Reviews:

Related manuals for Viera ST50A series

Brands by name

Popular brands

Panasonic Viera ST50A series, Operating Instructions Manual

Search results

Summary of Contents for Viera ST50A series

Reviews:

Related manuals for Viera ST50A series

Brands by name

Popular brands