Se
tup
Adjusting LCD monitor/viewfinder
49
LSQT1021
Adjusting LCD monitor/viewfinder
1 Press the MENU button, then select [
SETUP]
#
[
LCD SET] or [
EVF SET]
#
[YES] and
press the joystick.
2 Move the joystick up or down to select the item to
be adjusted. Then, move the joystick left or right
to make the adjustment.
The bar display moves.
[
LCD SET]
:
Brightness of the LCD monitor
:
Colour level of the LCD monitor
[
EVF SET]
: Brightness of the viewfinder
∫
In order to increase the brightness of the entire LCD monitor
Press the POWER LCD button.
The [
] indication appears on the LCD monitor.
≥
The entire LCD monitor will become approx. twice
as bright as the normal.
Adjusting the brightness and colour level
EVF
≥
To adjust the brightness of the viewfinder, close the
LCD monitor and extend the viewfinder to activate
it.
≥
When the LCD monitor is rotated by 180° towards
the lens, the brightness and colour level of the LCD
monitor cannot be adjusted.
≥
These settings will not affect the images actually
recorded.
EVF
EVF
≥
When the POWER LCD button is pressed again,
the [
] indication disappears and the original
brightness is restored.
≥
This will not affect the images to be recorded.
≥
If you turn on the unit when the AC adaptor is used,
this function will automatically be activated.
LSQT1021(ENG).book 49 ページ ２００６年２月２日 木曜日 午後３時１０分
