manualshive.com logo in svg

Panasonic VDR-D250EB, Operating Instructions Manual, Page: 48 / 172

Share
Download
Panasonic VDR-D250EB Operating Instructions Manual Download Page 48

Se

tup

Setting date and time

48

LSQT1021

∫

Changing the date and time display style

Press the MENU button, then select [

SETUP] 

#

 

[

DATE/

TIME] 

#

 desired display style and press the joystick.

You can also show or change the date and time display by repeatedly 
pressing the DATE/TIME button on the remote control.

≥

The recording time is not displayed in disc playback mode.

∫

Changing the display style

Press the MENU button, then select [

SETUP]

 

#

 

[

DATE FORMAT] 

#

 desired display style and press the 

joystick.

[DATE]

[D/T]

[OFF]

Display style

Y/M/D

M/D/Y

D/M/Y

Screen display

15:30
2006.12.15

15:30
12.15.2006

15:30
15.12.2006

15:30 
15.12.2006

15.12.2006

≥

The date and time function are driven by a built-in 
lithium battery.

≥

Make sure to check the time before recording.

≥

If the time display becomes [- -], the built-in lithium 
battery has run down. Use the following steps to 
charge the battery. When turn on the power for the 
first time after charging, a message asking you to 
set the date and time will appear. Select [YES] and 
set the date and time.

To recharge the built-in lithium battery

Connect the AC adaptor or attach the battery to the 
unit, and the built-in lithium battery will be 
recharged. Leave this unit as is for approx. 
24 hours, and the battery will save the date and 
time for approx. 6 months. (Even if the OFF/ON 
switch is set to OFF, the battery is still being 
recharged.)

WARNING

THE LITHIUM BATTERY IN THIS 
EQUIPMENT MUST ONLY BE REPLACED 
BY QUALIFIED PERSONNEL. WHEN 
NECESSARY, CONTACT YOUR LOCAL 
PANASONIC SUPPLIER.

LSQT1021(ENG).book  48 ページ  ２００６年２月２日　木曜日　午後３時１０分

Summary of Contents for VDR-D250EB













































































































































































Reviews:

No comments