W
ith othe
r prod
uc
ts
With a printer (PictBridge)
118
LSQT1021
8 Select the layout setting on [
PAGE LAYOUT].
≥
You cannot set page layouts not supported on the printer.
9 Select [
PRINT]
#
[YES] and press the joystick.
The pictures are printed.
≥
Exit PictBridge by disconnecting the USB cable after the pictures
have been printed.
When you stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is selected, the number of prints set is cancelled and the
screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to
step 3.
STANDARD:
Layout specific to the printer
:
No frame print
:
Frame print
≥
Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥
Check the settings for the paper size, quality of
print, etc. on the printer.
≥
The sides of pictures recorded when [
]
(VDR-D300)/[
] (VDR-D250) is set may be cut
at printing. Check before printing.
When using the printer with a trimming feature or
other feature which cuts out both edges of the
pictures, cancel the feature for printing. (Refer to the
operating instructions of the printer for details.)
≥
You may not be able to print still pictures recorded
with other products.
≥
When the unit is connected directly to the printer,
the DPOF settings cannot be used.
≥
Connect the printer directly to this unit. Do not use a
USB hub.
2
2
1.7
1.7
LSQT1021(ENG).book 118 ページ ２００６年２月２日 木曜日 午後３時１０分
