Indications
Othe
rs
145
LSQT1021
Messages
CANNOT RECORD.
Data writing to the disc or card has failed.
NO DATA.
There are no images recorded on the disc or card.
INCOMPATIBLE DISC.
You inserted an incompatible disc (copy-protected discs, etc.).
PLEASE CHECK THE
DISC.
You inserted a disc that cannot be read on this unit (a disc
recorded in NTSC video format etc.).
FOR BEST
PERFORMANCE
PANASONIC DISC IS
RECOMMENDED.
You inserted a disc that does not meet the DVD standard for
quality and performance so you may not be able to record
normally. Refer to the following support site for information
about discs that have been confirmed as compatible by
Panasonic.
http://panasonic.co.jp/pavc/global/cs/e_cam
(This website is in English only.)
CANNOT RECORD IN AGS
MODE.
The AGS function is activated. (
l
52)
CANNOT RECORD.
(THIS DISC IS FINALIZED)
A finalized DVD-RW (Video format) or DVD-R has been
inserted. After finalizing, the discs become play-only and cannot
record. If you un-finalize a DVD-RW (Video format), it can be
used for recording. (
l
108)
CANNOT RECORD. DISC
IS FULL.
The disc is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (
l
88) or insert a new disc.
CANNOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
The temperature of the unit is high so it cannot be operated.
Turn off the power, wait until the unit cools and then turn on the
power again.
LSQT1021(ENG).book 145 ページ ２００６年２月２日 木曜日 午後３時１０分
