Panasonic VDR-D250EB Operating Instructions Manual Download Page 106

Page: 106 / 172

Dis

nd c

Formatting discs and cards

106

LSQT1021

(SD)

Please be aware that if an SD card is formatted, then all the data recorded on the card will be
erased. Store important data on a computer, etc.

Rotate the mode dial to select

1 Press the MENU button, then select [

SETUP]

[

FORMAT CARD]

[YES] and press the

joystick.

2 When the confirmation message appears, select [YES], then press the

joystick.

≥

When formatting is complete, press the MENU button to exit the message screen.

Formatting an SD card

This is for initializing cards.

≥

Use this unit to format SD cards. If an SD card is
formatted on other products (such as a computer),
the time spent for recording may become longer
and you may not be able to use the SD card.

≥

Depending on the type of SD card being used, it
may take time to format.

≥

During formatting, do not turn this unit off.

≥

When you format the SD card, use a battery with
sufficient battery power or the AC adaptor.

≥

Do not remove the SD card while formatting.

LSQT1021(ENG).book 106 ページ２００６年２月２日　木曜日　午後３時１０分

Summary of Contents for VDR-D250EB













































































































































































Search results

Summary of Contents for VDR-D250EB

Reviews:

Panasonic VDR-D250EB, Operating Instructions Manual, Page: 106 / 172

Search results

Summary of Contents for VDR-D250EB

Reviews: