Operation modes
23
6.2 Manual (MNL) mode
Hold down MODE to switch to the setting mode. Hold down MODE again to return to AUTO mode.
You can also switch the mode to MNL by turning on the external MNL ON signal while the
controller is in AUTO mode. (When the mode is switched by the external signal, the MNL
indicator will flash.)
Displays in MNL mode
Display Descriptions
EMISSION switch
Pressing it will start irradiation.
Stays on during irradiation.
READY
Indicates that irradiation is ready to start.
Stays on while irradiation is ready to start.
Stays off during irradiation.
Indicates the channel connection, irradiation
operation, and temperature warning.
Green: Indicates that the head is connected.
Orange: Indicates a temperature warning.
Red flashing: Indicates that irradiation is in
progress.
Flashes during irradiation, changing the
flashing speed depending on the detected
temperature of the LED head.
CH1 to 4
ERROR
Lit when an error occurs.
PWR
Stays on while the power mode is on.
Display (3 digits)
Displays the UV intensity level (0 to 100%),
LED head temperature (0 to 999), and
irradiation time (0 to 99.9, 100 to 999 sec.).
%
Stays on while the 3-digit display indicates
the UV intensity level.
sec.
Stays on while the 3-digit display indicates
the irradiation time.
x100hrs
Lit when the total irradiation time reaches
the warning point.
CH1 to 4
switches
Lit when the channel is selected.
(You can select the channels with an LED
head connected.)
Flashing speed
LED head temperature
Off No
irradiation
Slow Standard
Mid
Standard
≤
Temp. < Warning level
Quick
Warning level
≤
Temp. < Abnormal
)
Displays the data of
the flashing channel.
