Panasonic UF-6950 - Panafax - Multifunction Facsimile Manual Download

Page: 134 / 150

134

Problem Solving

Information Code

When an anomaly occurs, the display may show one of the Information Codes listed below. These will help you to identify,
and correct the problem.

Info.

Code

Meaning

Possible Action

Page

030

Document is misfeeding.

1. Reload the document properly.
2. Remove the document jam.
3. Adjust ADF.

031

Document is too long or jammed.
Document length exceeds 39.4 inches (1 meter). The
length limitation for 600 dpi, is subject to the available
Memory size.

600 dpi
(Max. Length is 24 inches (600 mm))

1. Reload the document properly.
2. Remove the document jam.

061

ADF Cover is open.

Close the ADF Cover.

212

Communication error occurred while receiving or
transmitting.

Check with the other party.

400

During initial connection, receiving station did not
respond or communication error occurred.

1. Check with the other party.
2. Reload the document and send again.

401

Remote station required a Receiving Password to
receive the document. Remote station does not have
Confidential Mailbox.

Check the remote station.

402

During initial connection, communication error
occurred.

Reload the document and send again.

403

No polling capability at the remote side.

Ask remote side to set “POLLED=ON”.

404/405 During initial connection, communication error

occurred.

Reload the document and send again.

407

No confirmation from the receiving station for the
previous page sent.

Wait a few minutes and send again.

408/409 Remote side confirms previous page(s) is(are)

illegible.

Wait a few minutes and send again.

410

Communication aborted by the transmitting side.

Check with the other party.

411

Polling password does not match.

Check the polling password.

412

No data from the transmitting side.

Check with the other party.

414

Polling password does not match.

Check the polling password.

415

Polling transmission error.

Check the polling password.

416/417 Received data has too many errors.

Check with the other party.

420/421 Machine goes to receiving mode, but receives no

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

427

Interface is incompatible.

Check with the other party.

433

Communication error occurred while receiving or
transmitting.

Check with the other party.

Summary of Contents for UF-6950 - Panafax - Multifunction























































































































































Search results

Summary of Contents for UF-6950 - Panafax - Multifunction

Reviews:

Related manuals for UF-6950 - Panafax - Multifunction

Brands by name

Popular brands

Panasonic UF-6950 - Panafax - Multifunction, Facsimile Manual

Search results

Summary of Contents for UF-6950 - Panafax - Multifunction

Reviews:

Related manuals for UF-6950 - Panafax - Multifunction

Brands by name

Popular brands