Panasonic UF-6950 - Panafax - Multifunction Facsimile Manual Download

Page: 135 / 150

135

oblem Solving

NOTE

1. After identifying the problem, and taking the recommended action, if the Information Codes

keep reoccuring or Information Codes that appear on your machine but are not listed above,
please contact your local Panasonic Authorized Dealer.

434

Communication error occurred while receiving.

Check with the other party.

436/490 Received data has too many errors.

Check with the other party.

459

Communication error occurred while receiving.

Check with the other party.

494

Communication error occurred while receiving.

Check with the other party.

495

Telephone line disconnected.

Check with the other party.

501/502/

503/504

Communication error occurred using the internal V.34
Modem.

Check with the other party.

505

Polling trasnmission error.

1. Check with the other party.
2. Check the polling setting.

540/541/

542/543

Communication error occurred while transmitting.

1. Reload the document and send again.
2. Check with the other party.

550

Telephone line disconnected.

Check with the other party.

554/555 Communication error occurred while receiving.

Check with the other party.

580

Sub-address transmission to a machine that has no
Sub-address function.

Check the remote station.

623

No document loaded on the ADF.

Reload the document and send again.

630

Redial was not successful due to a busy line.

Reload the document and send again.

634

Redial was not successful due to no response from
the called station or wrong number dialed.

Note:

If busy tone was not detected, the machine will
only redial once.

Check the telephone number and send again.

638

Power failure occurred during the communication.

Check the power cord and plug.

870

Memory overflow occurred while storing documents
into memory for transmission.

1. Transmit documents without storing them

into memory first. Use Direct Transmission
when using G3 Fax Communication.

2. Install Optional Memory (SD Memory

Card).

140

Info.

Code

Meaning

Possible Action

Page

Summary of Contents for UF-6950 - Panafax - Multifunction























































































































































Search results

Summary of Contents for UF-6950 - Panafax - Multifunction

Reviews:

Related manuals for UF-6950 - Panafax - Multifunction

Brands by name

Popular brands

Panasonic UF-6950 - Panafax - Multifunction, Facsimile Manual

Search results

Summary of Contents for UF-6950 - Panafax - Multifunction

Reviews:

Related manuals for UF-6950 - Panafax - Multifunction

Brands by name

Popular brands