Customizing Your Machine
36
Fax Parameter Table
34
ENERGY SAVER
MODE
1
OFF
To reduce the power consumption in standby, select
Energy-Saver mode and specify the Delay Time (1 to 120
minutes) for the machine to enter into the selected mode.
The Delay Timer setting is only available in the Energy-
Saver mode.
OFF
:
The unit will remain in standby mode
and consume more energy than when
in the Energy-Saver mode.
ENERGY SAVER:
Saves energy by consuming less
power than when in standby mode by
turning off the fuser unit after the
specified time.
SLEEP mode cannot be selected when the Internet Fax
Option is equipped.
2
ENERGY
SAVER
(3)
(SLEEP)
35
DAYLIGHT TIME
1
INVALID
Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
at 2:00 am on the last Sunday in March and go back 1
hour at 3:00 am on the last Sunday in October.
2
VALID
37
RCV TO MEMORY
(----)
Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (Refer to Operating Instructions (For
Facsimile).)
38
ACCESS CODE
(----)
Enter a 4-digit Access Code to secure the machine from
unauthorized use. (Refer to Operating Instructions (For
Facsimile).)
39
PIN CODE ACCESS
1
NONE
Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (Refer to Operating Instructions
(For Facsimile).)
2
SUFFIX
3
PREFIX
42
CONF. POLLED FILE
SAVE
1
INVALID
Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2
VALID
43
PASSWORD-XMT
1
OFF
Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
receiving station when transmitting. (Refer to Operating
Instructions (For Facsimile).)
2
ON
44
PASSWORD-RCV
1
OFF
Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (Refer to Operating
Instructions (For Facsimile).)
2
ON
46
SELECT RCV
1
INVALID
Selecting whether the machine performs selective
reception. (Refer to Operating Instructions (For
Facsimile).)
2
VALID
47
REMOTE RCV
1
INVALID
Selecting whether or not the machine accepts remote
reception command. (Refer to Operating Instructions (For
Facsimile).)
2
VALID
48
TELEPHONE LINE
1
PSTN
Selecting the type of line connected.
2
PBX
49
PSTN ACCESS CODE
(----)
Setting PSTN Access Code. (Up to 4 digits)
No.
Parameter
Setting
Number
Setting
Comments
Summary of Contents for UF-6300
Page 63: ...63 memo Basic Operations ...