Customizing Your Machine
38
Fax Parameter Table
125
CONFIRM STATIONS
1
INVALID
Set whether to confirm the destinations.
When set to Valid the document cannot be sent unless the
destination is confirmed.
This function also operates when the addresses are
specified with Group Dialling or Program Dialling function.
If an address has been altered (Added or removed) when
confirming addresses, the address confirmation message
will appears again when transmitting the documents
(Pressing the start key).
2
VALID
133
JOB BUILD
1
OFF
Selecting whether the machine performs Job Build when
the total number of documents exceeds the maximum
capacity of the ADF, or when scanning the documents
manually one at a time. If you place the documents on the
ADF within 5 seconds after the ADF scan, the ADF scan
will be continued for the current scan. (Maximum number
of scanning sheets is 255 pages at one job.)
The Quick Memory Transmission feature (Fax Parameter
No. 82) is not available when the Job Build is set to
"2:ON".)
Up to 250 pages can be stored. When the number of
pages exceeds 255, the memory overfull message will be
displayed. Select "Yes" to start transmitting, or "No" to
cancel. If no action is taken within 5 seconds, the machine
will start transmitting the stored originals.
2
ON
135
JUNK FAX FILTER
Function to prevent direct mail FAX and unnecessary FAX
messages.
1. JUNK FAX FILTER
When set to "VALID", the machine will not receive the
faxes from the senders whose numeric ID has been
registered as a junk fax number. The denied number IDs
can be registered in "4.ID NO. REGISTRATION".
1
INVALID
2
VALID
2. RECEIVE WITHOUT ID
NO.
When set to "VALID", the machine will receive the faxes
from senders without numeric ID registered.
(This setting is available only when "1. JUNK FAX FILTER"
is set to "VALID".)
1
INVALID
2
VALID
3. RECEIVED ID PRINT
When set to "VALID", the sender’s numeric ID and
received time are printed at the bottom of the received
faxes. If the sender’s numeric ID is not registered, only the
received time is printed. (This setting is available only
when "1. JUNK FAX FILTER" is set to "VALID".)
1
INVALID
2
VALID
4. ID NO.
REGISTRATION
(NO. 01-30)
Register fax numbers as junk fax number.
Up to 30 fax numbers can be registered for junk fax
number. (Including numerals "0-9", blank space, and +
symbol.) (When comparing the sender's numeric ID to the
registered junk fax numbers, blank spaces between
numbers are ignored.)
136
RESTRICT D. DIAL
1
INVALID
Enable or disable the Restrict Direct Dial function.
When set to "VALID", manual input destination Tel No. and
"Redial" button are not accepted.
2
VALID
No.
Parameter
Setting
Number
Setting
Comments
Summary of Contents for UF-6300
Page 63: ...63 memo Basic Operations ...
