- 49 -
■
DVB-C
1. Enter the frequency with numeric buttons
●
Normally set
Symbol Rate
and
Service ID
to
Auto
.
2. Select
Start scan
with / and press
OK
to search
■
DVB-T
1. Select a channel with / and adjust frequency with / for each
channel
●
Set where the level of
Signal Quality
becomes the maximum.
2. Press
OK
to search
■
Analogue
Set Analogue channel manually after
Auto Setup
.
●
Set
Sound System
and
Colour System
, and then perform this function.
Normally set
Colour System
to
Auto
.
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L’
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with /
4. Select
Store
with / and press
OK
to set
●
Use
Fine Tuning
to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
●
If a VCR is connected only with the RF cable, select channel position
0
.
Summary of Contents for TX-L24XW6
Page 1: ...eHELP English TX L24XW6 ...
Page 168: ...Ver 2 02 ...