Panasonic TX-L24XW6, Ehelp

Page: 156 / 168

- 156 -
●
Is Contrast , Brightness or Colour in the Picture Menu set to the minimum?
Settings Picture Basic settings
Blurry or distorted image (no sound or low volume)
●
Reset channels.
Watching Tuning and editing channels Auto Setup
There may be red, blue, green and black spots on the screen
●
This is a characteristic of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black. Please note this
does not affect the performance of your LCD.
Digital TV
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
●
Check the position, direction and connection of the aerial or dish.
●
Check Signal Condition . If Signal Quality is displayed in red, the DVB signal
is weak. Connecting the aerial to the TV directly may improve signal quality
than connecting the aerial through the equipment (set top box, DVD, etc.).
Watching Tuning and editing channels Signal Condition
Watching Basic Basic connection
●
Weather conditions will affect signal reception (heavy rain, snow, etc.),
in particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
●
Due to the digital reception technologies involved, quality of the digital
signals may be relatively low in some cases, despite good reception of
analogue channels.
●
Turn the TV off with Mains power On / Off switch, and then on again.
●
If the problem persists, consult your local dealer or service provider for the
availability of services.