Panasonic TX-49FX780E Ehelp Download Page 50

Page: 50 / 340

No signal Power off

(

Off

)

Automatically turns the TV to Standby mode to prevent unnecessary power

consumption when no signal is received and no operation is performed for 10

minutes.

●

A notification message will appear 3 minutes before going into Standby

mode.

■

Eco Navigation

Automatically sets the TV to the most suitable energy-saving mode.
The concerned items and their current settings are displayed. Select

Set to

Eco

to set them to the energy-saving settings at once.

1. Display the menu with

2. Select

Setup

Eco Navigation

and press

to access.

3. Select

Set to Eco

and press

to set.

●

Auto Standby

and

No signal Power off

are active when

Eco Navigation

set to

Set to Eco

■

Radio Mode

Sets the timer for turning off the screen automatically when a radio channel is

selected.
1. Display the menu with

2. Select

Setup

Display Settings

Radio Mode

and press

to access.

3. Select the time and press

to set.

Off

(

seconds

)

●

Sound is active even if the screen is turned off. This function is effective in

reducing power consumption when listening to a radio channel.

●

Press any buttons except Standby On / Off switch,

Volume Up / Down

and

MUTE

to turn the screen on.

●

Not valid in Analogue

- 50 -

Summary of Contents for TX-49FX780E





















































































































































































































































































































































Search results

Summary of Contents for TX-49FX780E

Reviews:

Related manuals for TX-49FX780E

Brands by name

Popular brands

Panasonic TX-49FX780E, Ehelp

Search results

Summary of Contents for TX-49FX780E

Reviews:

Related manuals for TX-49FX780E

Brands by name

Popular brands