Panasonic TX-49FX780E, Ehelp

Page: 262 / 340

Using Common Interface
Some features are not available on all models.
The Common Interface Module menu provides access to software contained
in Common Interface (CI) Modules.
●
This function may not be available in some countries or regions.
●
Video and audio signals may not be output depending on the broadcast or
service.
Although CI module may enable you to view some services, this TV does not
guarantee all services (e.g. encrypted pay-TV channels). Please use only the
broadcaster-approved CI module. Consult the operator / broadcaster or CI
module manufacturer for more information and conditions of the services.
■
Insert the CI module (optional)
●
Normally encrypted channels will appear. (Viewable channels and their
features depend on the CI module.) If encrypted channels do not appear,
take the following steps.
●
For details, read the manual of the CI module, or check with the content
provider.
1. Select the mode with TV .
DVB-S / DVB-C / DVB-T
2. Display the menu with MENU .
3. Select Setup > Common Interface and press OK to access.
4. Select Slot 1: / Slot 2: , press OK and follow the on-screen instructions.
●
To enter the CICAM PIN number, select Option Settings .
●
On-screen instructions may not correspond to the remote control buttons.
●
You can also select the CI module to watch the encrypted channels from
CAM Selection .
Watching > Basic > AV Options
= Note =
●
To tune in the encrypted channels properly, ensure the appropriate CI
module is inserted and selected.
●
To use this function fully (watching, recording, etc.), insert the same CI
module for each slot.
- 262 -