28
The Common Interface Module menu provides access to software contained on Common Interface
Modules. These can be inserted in the “CI1” and “CI2” slots located at the rear of the TV.
IMPORTANT NOTES:
Switch off the TV using the front panel switch before inserting or removing a module.
If you are installing a TV software update, please follow the dedicated instructions supplied with the module.
Insert the CI module as described below:
Switch on the TV
Open the Setup menu
Move to DVB setup
Access DVB setup menu
Move to Common Interface
Module
Access Common Interface
Module
COMMON INTERFACE MODULE MENU
Some Common Interface Modules may be a two piece design
consisting of a card reader together with the viewing card. When using
this design of card, first insert the card reader firmly into a CI slot on
the TV (flap side to the left).
Secondly, insert the viewing card into the reader.
Card reader
Viewing card
TV
Insert flap
side to the
left !
Inserting a conventional Common Interface Module.
Summary of Contents for TX-28DT30
Page 51: ...51 NOTES...
Page 52: ...52 NOTES...
Page 53: ...53 02X Panasonic U K Ltd Willoughby Road Bracknell Berks RG12 8FP...