45
DVB Teletext services differ greatly from analogue teletext. When you switch to a DVB teletext service, the images you see can
contain graphics and text, laid out and controlled in a manner decided by the broadcaster. In all cases, it is possible to navigate
the pages using buttons on the remote control, but because the commands available must apply to all manufacturers of DVB
equipment, some on- -screen commands may not correspond exactly to the remote control buttons. For example:
D
For the on- -screen command ‘
select
’ or ‘
go
’, use the
OK
button.
D
If you see the
A
" B Y
symbols, use the appropriate cursor keys.
D
If you see a line of key words displayed in red, green, yellow and blue, use the coloured multifunction buttons to operate the
functions.
D
The
EXIT
button should allow you to exit the teletext system. Alternatively, press
GUIDE
to select another channel.
DVB Teletext services
‘Arrow keys’
‘Up/Down/
Left/Right’
‘Select’
‘Go’
‘OK’
Coloured Keywords
Numbered options
Return to TV mode
As soon as you switch to a DVB channel with links to a Teletext service, software is downloaded in the background to enable the
teletext function. This means that when switching to a DVB channel, you should wait for approximately 5 seconds before pressing
the TV/TEXT button - - this will allow the software to download. If you press the TV/TEXT button before download is complete, there
will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will find there is a short delay when moving between pages while the page downloads.
There is often a prompt shown somewhere on the page (for example “Loading”) to let you know that this is happening.
TELETEXT OPERATION
Summary of Contents for TX-28DT30
Page 51: ...51 NOTES...
Page 52: ...52 NOTES...
Page 53: ...53 02X Panasonic U K Ltd Willoughby Road Bracknell Berks RG12 8FP...
