29
Select the Module name
Access the module
If no modules are inserted the
message “No Module Inserted!”
will be displayed. (If you have
inserted a module, check that it is
fully inserted.)
The features that now appear on
screen are dependent on the
contents of the selected Common
Interface Module.
Refer to the instructions supplied
with the card or contact the vendor.
In all cases, it is possible to
navigate the pages using buttons
on the remote control, but because
the commands available must
apply to all manufacturers of DVB
equipment, some on- -screen
commands may not correspond
exactly to the remote control
buttons. For example:
For the on- -screen command
‘
select
’ or ‘
go
’, use the
OK
button.
If you see the
A
" B Y
symbols,
use the cursor keys.
If you see a line of key words
displayed in red, green, yellow and
blue, use the coloured
multifunction buttons to operate
the functions.
The
EXIT
button should always
allow you to exit the CI software.
COMMON INTERFACE MODULE MENU
setup
1
parental lock
2
modem settings
3
auto update
4
ONdigital data
5
ONdigital updates
main menu
select
exit
Summary of Contents for TX-28DT30
Page 51: ...51 NOTES...
Page 52: ...52 NOTES...
Page 53: ...53 02X Panasonic U K Ltd Willoughby Road Bracknell Berks RG12 8FP...