When upgrading a previously purchased bicycle
carrier you will first need to remove the existing
skewer prior to installing your Key Locking Skewer.
Remove existing skewer assembly
Bicycle carrier after removal
of standard skewer.
Step 1:
Unscrew and
remove adjustment nut
Step 2:
Remove skewer
from bicycle carrier.
Tools Required
No tools are required for installation of this item.
Care Instruction:
Thoroughly clean vehicle roof racks and/or bicycle carrier
prior to fitting the Rhino Key Locking Skewer.
1
2
3
5
6
4
Locking Skewer (as packaged)
Disassembled Components
Parts List
Item
Component Name
Qty
Part No.
1
Skewer Shaft
1
B151
2
Clamp Housing Assembly
1
M291A
3
Lock Plate
1
M274
4
Lever Assembly
1
M273A
5
Dowel Nut
1
N044
6
Key
1
n/a
7
Instruction Manual
1
RS-277
RKLS Key Locking Skewer
Place these instructions in the vehicle’s glove box after installation is complete.
Important:
Please read these instructions carefully prior to installation.
Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
Check the contents of this kit before commencing fitment and report any discrepancies.
Page 1 of 5
