Panasonic TU-PT600B, Operating Instructions Manual

Page: 11 / 48

11
Quick start Guide
4. Q-Link connection of Receiver, VCR and Satellite using Scart and RF cables
For Q-Link to function correctly this set, VCR and
Satellite Receiver must be connected as shown
in the diagram below.
RF connections
• Connect an RF cable to the Antenna Input
terminal of the Satellite Receiver.
• Connect an RF cable from the Antenna Output
terminal of the Satellite Receiver to the Antenna
Input terminal of the VCR.
• Connect an RF cable from the Antenna Output
terminal of the VCR to this set Antenna Input
terminal (
).
Scart connections
‘Fully wired’ Scart Cables should be used for all of
the Scart connections.
• The AV2 Scart socket of the VCR must be
connected to the VCR Scart socket of the
Satellite Receiver.
• The TV Scart socket of the Satellite Receiver
must be connected to the AV1 Scart socket of
this set.
Note:
If using a ‘Q-Link’ VCR then the AV1 Scart socket
of the VCR must be connected to the AV2 Scart
socket of this set. If your VCR is not a ‘Q-Link’
VCR, please consult your VCR operating
instruction book.
Notes:
• Additional equipment and cables are not supplied.
• Further details of audio/ video connections can
be found on pages 42 and 43.
AV1 AV2 AV4
DISPLAY OUT
RGB VIDEO
S-VIDEO VIDEO
S-VIDEO RGB
VIDEO
Receiver
ANTENNA
(Not Supplied)
Antenna Lead
To Display
Antenna
Output
terminal
Antenna
Input
terminal
Antenna
Input
terminal
Antenna Input
terminal
VCR
Satellite
Receiver
TV
Scart
socket
VCR
Scart
socket
AV2
Scart
socket AV1
Scart
socket
Antenna Output
terminal
AV1
Scart
socket AV2
Scart socket
AV4C
VIDEO
AUDIO
P
R
P
B
Y L
R
R L
AUDIO OUT