13
Quick start Guide
6. This set to VCR download
If a Q-Link, NEXTVIEWLINK or compatible VCR has been connected to the AV2
socket before starting Step 1, programme information will be downloaded to the
VCR.
Downloaded tuning data will match the television’s.
Not all VCRs support this download of programme information, some may require
to be started manually. Refer to the VCR operating instruction book.
If a VCR other than those described above has been connected, then there will
be no download operation.
Notes:
If the VCR has not accepted download data from this set, you may need to select the Download option from the
VCR’s menu system.
Refer to the VCR operating instruction book.
If Q-Link is not operating correctly, check the following:
• The Scart cable is connected to this set’s AV2 Scart socket.
• The Scart cable is connected to the VCR’s compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart
socket.
• The Scart cable is a ‘fully wired’ type.
For further information on Q-Link and connecting equipment, see pages 9, 10, 11, 36 and 42.
• The sorted programme order depends upon the TV signal, the broadcasting system, and reception conditions.
If the order is not to your preference it can be rearranged. Refer to the Programme edit menu - see page 27 for
details.
TV
−
> VCR DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
If this set has not been programmed for you then Auto setup will begin, your
stations will be located, sorted into order and stored ready for use (refer to page
31).
5. Auto setup
SETUP : Return to tuning menu
TV/AV
: To exit
21 68
AUTO SETUP IN PROGRESS
SEARCHING:
PLEASE WAIT
Summary of Contents for TU-PT600B
Page 47: ...MEMO ...
