37
Tuning your VCR and satellite receiver
Your new set is supplied with programme position ‘0’ set to receive an RF signal from your VCR, although a Scart
connection is preferable if the VCR is so equipped (see page 10, 11 or 42 for suitable inputs to the Scart socket
on this set.)
However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or
sound from your VCR on programme position ‘0’ of this set. Either adjust the tuning of this set’s programme
position ‘0’ (follow the instructions below) or adjust the RF channel of your VCR (some VCR’s allow adjustment of
their RF channel via their remote control unit) or both until the Television receives the RF output channel of your
VCR.
It is intended that this advice is used in conjunction with the instruction books for your additional equipment.
Tuning your Receiver to the VCR.
Switch on the VCR, insert and play a pre-recorded tape with known content.
1
Press
SET UP
.
2
Move to chosen Tuning menu option by using
or
.
3
Access Tuning menu by using
or
.
4
Move to chosen Manual tuning by using
or
.
5
Access Manual tuning by using
or
.
6
Select programme position ‘0’ VCR by using
or
.
7
Start searching for the VCR playback of the known content tape by using
or
.
When the VCR playback is found, press
STR
to store.
Pressing
TV/AV
to exit.
SOUND
TV/AV
SET UP
PICTURE
DIRECT TV REC ASPECT CH RETURN
21 68
Manual tuning
TV/AV
’STR’ Button Store
E x i t
Serch
down / up
Programme
down / up
Return
CH44
VCR
The tape with known content
is found and displayed.
Pressing
STR
will store the
setting.
Notes:
• If picture patterning occurs on programme position ‘0’ it may be necessary to adjust the RF output channel of the
VCR, refer to the VCR instruction book.
• If a Satellite Receiver and a VCR are going to be used with RF cable connections it is important to avoid both units
being set on the same channel.
Refer to the Satellite Receiver and VCR instruction books for precise tuning information.
VCR
Summary of Contents for TU-PT600B
Page 47: ...MEMO ...