background image

20

Display Rotation

1

Click   on the notification area and click one of the display angles.

NOTE

z

While the display is rotated:
• Do not use the Extended Desktop. The touch pad, touchscreen may not work properly.
• Do not calibrate the touchscreen.
• Do not set the resolution larger than that of the internal LCD.
• The computer’s performance is slightly lowered.

z

You cannot rotate the display when the [Command Prompt] is set to “Full Screen”.

z

When the display is rotated, the motion video may not be displayed correctly or the sound may be distorted. Return the 
display angle to 0

°.

z

When you set the resolution to 800 x 600 pixels and rotate the display, the resolution shown in [Screen resolution] of 
[Display Properties] may not correspond to the correct resolution. This is not a problem.

1

Click   on the notification area and click [Setting].

2

Change the settings.

A. You can choose the order of the display rotation. If you choose [None], 

the order is skipped.

You can change the following settings only if you logged on to Windows 
as an administrator.
B. When a check mark for [Allow all users to use setting dialog] is added, 

each user can choose the order.

C. When a check mark for [This setting affects all users] is added, the 

order which you chosen is set to all users. To use the same setting for 
all users, remove the check mark to [Allow all users to use setting dia-
log] and add the check mark for [This setting affects all users].

3

Click [OK].

Rotating the Display

Changing the Settings

A

C

B

Summary of Contents for Toughbook CF-U1A1B1G2M


















































































































Reviews: