15
Getting Started
CAUTION
You can change the user name, password, image, Wireless Networks (
●
Windows 7
)
and security setting (
Windows XP
) after setup of Windows.
Remember your password. If you forget the password, you cannot use the Windows.
●
Creating a password reset disk beforehand is recommended.
Windows 7
Do not use the following words for user name : CON, PRN, AUX, CLOCK$, NUL, COM1 to
●
COM9, LPT1 to LPT9, @. In particular, if you create a user name (account name) that includes
the “@” mark, a password will be requested at the log-on screen, even if no password has
been set. If you try to log on without entering a password, “The user name or password is
incorrect.” is displayed and you will not be able to log on to Windows (
page 22).
Windows XP
You cannot choose the following words for user name and password: CON, PRN, AUX,
●
CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
When you set date/time/time zone and click [Next], the screen may not go to the next step
●
for a few minutes. Do not touch the screen, the keyboard, the mouse and wait until the
screen changes.
If “An unexpected error has occurred…” (or a similar message) is displayed, click [OK].
●
This is not a malfunction.
Perform the screen calibration.
4
NOTE
Before performing the calibration, close Tablet PC Input Panel.
●
Windows 7
●
Before performing the calibration, rotate the display to primary landscape.
1
Click
Windows 7
(Start) /
Windows XP
[start] - [All Programs] - [Panasonic] -
[Calibration Utility].
2
Windows 7
If [User Account Control] is displayed, click [Yes].
3
Click [Pen input (digitizer)].
4
Using the digitizer pen, touch each of the “+” target marks one by one, and then click
[Yes].
5
Repeat step
1
and
2
.
6
Click [Touch input].
7
Using your finger, touch each of the “+” target marks one by one, and then click [Yes].
Windows XP
Create a new account.
5
1
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Windows.
●
Creating a password reset disk beforehand is recommended.
NOTE
PC Information Viewer
●
This computer periodically records the management information of the hard disk, etc. The maximum data volume
for each record is 1024 bytes. This information is only used for estimating the cause when the hard disk goes down
by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose
described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information
history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
(
Reference Manual
“Checking the Computer’s Usage Status”)
DFQW5523ZA̲CF-H2mk1.indb 15
DFQW5523ZA̲CF-H2mk1.indb 15
2011/06/22 14:21:08
2011/06/22 14:21:08
