Panasonic Toughbook CF-F8EWAZZJM Page 106 Reference Manual Download

Page: 106 / 140

106

Setup Utility

To change the boot order

Press

Enter

on the boot device you want to change and select the boot device from the following menu.

• When a selected boot device in the following menu already exists in either of the [Boot Option (#1 to #6)] (for CF-F8/CF-

W8 Series) or [Boot Option (#1 to #5)] (for CF-T8 Series), the boot device appears at the newly selected position by
switching the positions with the original boot device that existed before at the position.

• When you select [Disabled] in the following menu, the disabled [Boot Option] is ignored and the boot device in the next [Boot

Option] operates.

The performance is confirmed by Panasonic USB floppy disk drive (optional: CF-VFDU03U) when the computer boots from the USB
Floppy Disk.

Hard Disk
CD/DVD Drive <Only for CF-F8/CF-W8 Series>
LAN
USB Floppy Disk

USB Hard Disk
USB CD/DVD Drive
Disabled

Summary of Contents for Toughbook CF-F8EWAZZJM













































































































































Search results

Summary of Contents for Toughbook CF-F8EWAZZJM

Reviews:

Related manuals for Toughbook CF-F8EWAZZJM

Brands by name

Popular brands

Panasonic Toughbook CF-F8EWAZZJM, Reference Manual

Search results

Summary of Contents for Toughbook CF-F8EWAZZJM

Reviews:

Related manuals for Toughbook CF-F8EWAZZJM

Brands by name

Popular brands