![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-73-series/toughbook-cf-73-series_operating-instructions-manual_4114992031.webp)
31
Appendi
x
This computer is equipped with a utility for erasing hard disk data.
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk
data following the steps below.
The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data
that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a
company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or
damages suffered as a result of the use of this utility.
Preparing
Hard Disk Data Erase Utility
NOTE
Be sure the AC adaptor is connected until the procedure is completed.
This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks.
This utility cannot erase data from damaged disk.
This utility cannot erase data for specific partitions.
After executing this utility, the computer cannot be booted from the hard disk.
You will need the Product Recovery CD-ROM and CD drive.
Procedure
1
Turn the computer off and set the CD drive in the multimedia pocket.
2
Turn the computer on, and immediately hold down
F2
. Release the key when the Setup Utility starts up.
If the password has been set, enter the Supervisor Password.
3
Select [Boot] menu, then select [CD Drive] and press
F6
until [CD Drive] is at the top of the [Boot] menu.
4
Place disc number one of the recovery CDs into the CD drive.
5
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will reboot, and this screen should appear.
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. Start restoring the operating system.
2. Erase the whole data on HDD for security.
3. End
---------------------------------------------------------------------
6
Select [2. Erase the whole data on HDD for security.].
7
At the confirmation message, press
Y
.
8
At [<<<Start menu>>>], press
Enter
.
9
The time required for erasing data will be displayed.
Press
Space
.
10
At the confirmation message, press
Enter
.
The operation of erasing the hard disk starts.
11
After the operation is complete:
Under normal conditions, the message [Hard disk data has been deleted.] will be displayed.
If a problem occurred during the operation, an error message will be displayed.
12
Remove the recovery CD, then turn off the computer by using the power switch.