![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-73-series/toughbook-cf-73-series_operating-instructions-manual_4114992025.webp)
25
T
roubl
eshoot
in
g
The external display no
longer displays properly
When the screensaver is set,
an error will occur during a
resume operation
Windows XP
An error occurs or the com-
puter freezes while using
Extended Desktop
Display
(continued)
When an external display not compatible with the power saving mode is used with the
computer, the external display may no longer display properly when the computer enters the
condition the power of the display is off (for energy conservation purposes). In such cases,
turn off the power to the external display.
When the computer automatically enters the standby or hibernation mode while the
screensaver is running, an error may occur during a resume operation. In such cases, turn off
the screensaver or try changing the pattern of the screensaver.
If you use a 3D screen saver while in Extended Desktop mode at a high resolution, an error
may occur or the computer may freeze. Under these conditions, do not use a 3D screen
saver.
Battery Indicator
The red indicator lights
The red indicator blinks
The orange indicator blinks
The battery level is very low (the charge is less than approx. 9% capacity).
Connect the AC adaptor. You can use the computer when the indicator light is orange. If you
do not have an AC adaptor, save your data and power off your computer. After replacing the
battery pack with a fully charged one, turn your computer on.
Quickly save your data and power off your computer. Remove the battery pack and discon-
nect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or recharg-
ing function may be defective.
Battery cannot be recharged temporarily because the internal temperature of the battery pack
is outside of the acceptable temperature range for recharging. Once the allowable range re-
quirement is satisfied, charging begins automatically. Your computer can be used normally.
Reference Manual
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\ar505enu.exe] in [Start] - [Run] to
reinstall the program. When installing the program, do not change the installation destina-
tion folder. If the destination folder is changed, the Reference Manual cannot be opened
from the [Start] menu.
The Reference Manual is
not displayed
Windows cannot be shut
down or restarted
“This program is not re-
sponding” is displayed
when shutting down or log-
ging off.
Shutting down
If a USB device is connected, try removing it.
This message appears periodically; for example, when using a Wireless LAN. If the mes-
sage appears, select [End Now]. Delete the check mark for [Show the tray icon] in the
following menu.
Windows 2000
[Start] - [Programs] - [Intel Network Adapters] - [Intel(R) PROSet]
Windows XP
[Start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet]